DIGO Products

UNI Mortar

DIGO UNI MORTAR

Product
UNI Mortar is a powdery, fine granular material that consists of mineral fillers, hydraulic binders and high-quality synthetic resins.

Specific use
UNI Mortar is used for thin layer plastering of inner and outer walls and plastering of cellular concrete. UNI Mortar is also made for replastering of, for example, painted or with ornamental plaster treated outer walls.
It also provides a solid base for various finishing layers.

Characteristics
UNI Mortar is waterproof, weather-resistant, shock-resistant, has a good adherence and is easy to apply.

Processing temperature
Do not use UNI Mortar when the outside temperature and/or the temperature of the base can drop below 5°C during drying.

Method of application
UNI Mortar is prepared with ± 5.5 litres of water per sack of 25 kg. The material is prepared lump-free with a rapid mixer. UNI Mortar is applied in layer thickness up to 4 mm as evenly as possible. It is recommended to plaster a reinforcing tissue in the mortar in bases where there is a possibility of cracking. UNI Mortar can be applied in multiple layers and also treated mechanically.

Consumption
± 1.3 kg per m² per mm layer thickness.

Packing/Contents
In sacks of 25 kg.

Surface
The surface must be free from dust, grease and powdery coats of paint and dry. Pre-treat smooth surfaces with stuc-contact.

Storage
Store dry and free from moisture.

Remark
In the case of strong wind and bright sunlight, precautions against fast drying must be taken.