DIGO Products - SILICONE WALL PAINT

Silicone Wall Paint

DIGO SILICONE WALL PAINT

Product
Silicone Wall Paint is a masonry paint specially developed for outer walls. On the basis of alkyl silicone resin emulsion and alkali-resistant, plasticizer-free and non-saponifiable synthetic resins dispersion.

Specific use
Silicone Wall Paint is used on all stony and plastered outer walls where excellent vapour diffusion and low water absorption is required.

Characteristics
Silicone Wall Paint has a good adherence, excellent protection, a high permeability and a very low water absorption (a low water absorption produces little contamination).
Water absorption (KWA): [kg/(m²*-t)] 0.08
Permeability: [g/(m²*d) ]
SD: [m] 0.062

Colour
Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.

Processing temperature
Do not use at a surface and ambient temperature below + 5°C.

Method of application
Before applying the first layer of Silicone Wall Paint, pre-treat the base with Silicone Pre-spread.
After drying (+ 12 hours), the Silicone Wall Paint is applied in one or two layers. Silicone Wall Paint is applied with roller, brush or spraying equipment.

Surface
The surface must be free from grease and free from powdery and loose coats of paint and dry.
Always pre-treat surfaces with Silicone Pre-spread.

Consumption
0.2 ltr/m²

Packing/Contents
In plastic buckets of 2, 5 and 10 kg.

Transportation and storage
Transport and store frost-free.

Remark
It can be cleaned with all kinds of cleaners except solvents. Specially fit for do-it-yourself.
In the case of strong wind and bright sunlight, precautions against fast drying must be taken.